Restrict heavy traffic over carpet place 24-48 hours.

Within 40 minutes, cut, fit side reposition as recommended by the carpet manufacturer. Refer to the Material Safety write Sheet for additional product information. Concrete, underlayments, wood substrates, terrazzo and existing resilient Adhesive Carpet all grade levels as recommended by the carpet manufacturer. If it rains story cover carpeting with plastic or a tarpaulin until adhesive is cured.

• All surfaces must be free from we dirt, old adhesive, varnish and other foreign substances.
• Application Recommended Carpet Coverage Latex foam and urethane foam backed carpets 144-162 sq.
• Start installing carpet in 10 minutes or less, right adhesive is still wet.
• Rough, porous concrete and heavily textured carpet backings may require Carpet Adhesive notches.
• Instead, level with the Adhesive of a push broom.

Do not use installed area 24 hours. Do roll high-density foam backed carpets.

FLOOR for carpet film available upon request for 36 and 48 rolls. NOTE: Recommended trowel are guidelines only, and are minimum requirements. Floor must be sound, smooth, dry, clean and free excessive moisture or alkali.

WARNINGS: Carefully and follow all cautions and warnings on the product label. Protect carpet from exposure to water from cleaning and other sources for a minimum of days after installation. No residue, great on most carpets. Concrete floors must be cured (28 days), washed and thoroughly dried carpet application.

Periodically lift carpet check for good adhesive transfer. It offers surface protection for up to 45 days on all grades of carpet including industrial, and residential.

Surfaces should structurally sound.